Change network configuration
How to change DHPC, IP address, subnet, name server & gateway of network interface
SIA Connect can be accessed through either Ethernet or Wi-Fi. Ethernet provides immediate plug-and-play access, while Wi-Fi requires configuration. This guide explains how to set up both connection types and adjust your network settings.
Subnet conflict
SIA comes with 2 network interfaces (the X1 and the X2), when changing their settings please make sure that they do not share the same subnet as it will create network routing conflicts.
To change the network configuration:
- In the SIA Connect portal go to Network
- Click the network interface you want to modify. A dialogue will open
- For details of the different network interfaces check Wiring & peripherals
- Modify the configuration of the network to match what your preferences. Check Network configuration parameters for additional parameter information
- Click Save
- SIA Connect will prompt you for a hard restart to apply the new configuration
After the restart, the IP change will take place. Please note you might have to modify you client computers IP address to access SIA Connect again.
In case you forgot your IP address you can easily Reset network configuration to default.
Network configuration parameters
Below is a table of all the various network parameters that can be set for the configuration.
| Parameter | Description |
|---|---|
| Enabled | Enabled or disable the network interface |
| Configuration |
Manual: Manually set the network configuration. This is static and is preferred in most cases where you want to be in control of the IP address and your network DHCP: Automatically assign IP address and configuration that it received by the router or the network. By using this you will not know what the IP address of SIA becomes unless you are in 100% control of your router & network. |
| IP | The IP address of the network interface |
| Subnetmask | Subnet mask of the network interface |
| Gateway | The default gateway of the network interface. This could for instance be the IP address of the router. |
| Nameservers | Nameservers / DNS servers. Multiple can be added by separating them with a "," |
Wireless network configuration parameters
If a wireless dongle (Wi-Fi) is attached to the USB it will show up on the network page with a WiFi symbol.
Using WiFi would require a SIA Connect with USB interface and a valid WiFi dongle with drivers SIA Connect has support for. Contact us for more information
| Parameter | Description |
|---|---|
| Wireless network name (SSID) | SSID of the WiFi network you wish to connect to. |
| Key | Password of the WiFi network |
| Encryption | Select which encryption the WiFi network uses None WEP WPA/WPA2 |