| Modbus_RTU-0.2.9 |
Modbus_RTU-arm64-0.2.9 |
Modbus_RTU-x86-0.2.9 |
2025-12-17
- Feature: Added support for INT64 and UINT64
|
| Modbus_RTU-0.2.8 |
|
Modbus_RTU-x86-0.2.8 |
2024-06-04
- Bugfix: Endianness not properly applied for int16 and uint16 data types
|
| Modbus_RTU-0.2.7 |
|
Modbus_RTU-x86-0.2.7 |
2024-01-16
- Bugfix: Floating point resolution set to 0 would remove that digit if this was 0. E.g. “120.321” would become “12” when floating point resolution was set to 0
|
| Modbus_RTU-0.2.6 |
|
Modbus_RTU-x86-0.2.6 |
2023-11-12
- Option to select between persistent or non-persistent connection
- Endianness and byte swap implemented for strings
|
| Modbus_RTU-0.2.4 |
|
Modbus_RTU-x86-0.2.4 |
2023-08-09
- Write preset option added to select whether to use multiple or single coils and registers when writing to slave
- Added support for baudrate 38400
|
Modbus_RTU-0.2.3
|
|
Modbus_RTU-x86-0.2.3
|
2022-16-12
- Swapping and byte ordering implemented
- Bugfix with "timeout" being showed on item level rather than instance level.
- Default slave ID set to 1
|
| Modbus_RTU-0.2.2 |
|
Modbus_RTU-x86-0.2.2 |
2022-07-05
|
| Modbus_RTU-0.2.1 |
|
Modbus_RTU-x86-0.2.1 |
2022-06-08
- Improved accuracy for Floats and Doubles
|
| Modbus_RTU-0.2.0 |
|
Modbus_RTU-x86-0.2.0 |
2022-04-29
- More informative error logging.
- Interframe delay between multiple devices
- Improved handling of multiple RTU server connections
|
| Modbus_RTU-0.1.9 |
|
Modbus_RTU-x86-0.1.9 |
2022-03-29
|
| Modbus_RTU-0.1.8 |
|
|
|
